ABB system spare parts | NI system module card parts | PROSOFT Network Interface Modules | Bently Card Components | KUKA Robot Accessories | Woodward governor | XYCOM card parts special sale |
FOXBORO card module | ALSTOM Control Panel | B&R Modules | KOLLMORGEN drives | VMIC Series Cards | EPRO Sensors | FANUC Servo Drive Module |
MOTOROLA system control module | HIMA Module Card Parts | ICS TRIPLEX Module Cards | TRICONEX Card Modules | Enterasys Switches | MOOG Controller Module | Moore System Module |
GE PLC module spare parts | AMAT HONEYWELL Module Card Parts | SCHNEIDER CPU Modules | EMERSON System Module Cards | METSO Spare Parts | XYCOM card parts special sale | YOKOGAWA Safety System Module |
product deion:
1. this controller: 1 the source is under phase. 2. fuse disconnection detection. 3. overtemperature protection of heat sink of the controller. 4. abnormal output contact is provided for remote monitoring, and the contact capacity is 240vac / 5a.
2. the controller has the standard of ce international safety certification.
3. it has rst fuse open circuit indicator of each phase, and provides abnormal output contact, which can be used for system emergency control.
4. the cooling fan has temperature control. when the temperature of the heat sink is 55 degrees, it works and stops at 45 degrees, which can improve the service life of the fan by 2-3 times.
5. applied to load: ir lamp, quartz lamp, molybdenum disilicide, heater. use shoemaking machinery, plastic bottle blowing machinery, plastic extrusion machinery, vacuum evaporation machine, vacuum sputtering machine, heat treatment furnace, electric furnace, electric boiler, enamelled wire machinery, drawing machinery, textile machinery, constant temperature and humidity system.
6. overload protection: flash for 1 time.
source power under phase protection: flash for 2 times.
three phase unbalance protection: flicker for 3 times.
body over temperature protection: flicker for 4 times.
load disconnection protection: flash for 5 times.
7. set the maximum current limit to make users more diversified choices.
2、 function deion
replace the traditional electromagnetic switch and make up the temperature immediately to minimize the temperature difference and avoid sparks and arcs. set the maximum current limit to make users more diversified choices.
3、kuc711ae101 specification
1. main power supply voltage: ac 220v 380-480v ± 10%
2. auxiliary voltage: ac 220v ± 15% 50 / 60hz
3. rated current: 25a-750a
4. working frequency: 47-63hz
5. output mode: phase control output
6. phase input control signal: 4-20ma, 0-5v, 1-5v, 0-10v, 2-10v.
7. output voltage range: 0-100%
8. operating environment: - 10 ℃ - 50 ℃, humidity below 90% rh
9. insulation impedance: more than 20 m ω (between power supply and housing), more than 20 m ω (between input signal and housing)
10. withstand voltage strength: 2500vac / 1min between power supply and housing, 1000vac / 1min between power supply and input signal